Operating System; Product Identification - HP Visualize b132L Technical Reference Manual

Operating System

HP–UX
HP–UX 10.2 is supported on the Model B132L/B160L workstations. HP–UX is booted from an
internal hard disk drive factory installed with Instant Ignition. HP–UX can also be installed from
external DDS or CD–ROM drives. If the workstation is a client on a LAN, HP–UX can be booted
over the LAN. Table 1–4 lists the HP–UX operating systems and languages for the workstation.
Table 1–4. HP–UX Operating Systems and Languages
Operating systems:
X Window System
Languages
User Interface and Graphics Libraries

Product Identification

On the back of the B132L/B160L workstation, a pullout card lists the product's serial number. The
information can be interpreted as shown below for an example serial number 6247A00001:
6247 A 00001
Figure 1–4. Product Serial Number Label Interpretation
General Information
Hewlett–Packard Preliminary and Confidential
HP–UX 10.2
HP–UX 10.2 complies with IEEE POSIX 1993.1 and
1003.1 FIPS 151–2 ANS X3.159–1989, System V Inter-
face Definition (SVID) Issue III (Base System and all Ex-
tensions, with exceptions), X/Open Portability Guide Issue
IV (XPG4) (Base Branding), and OSF/Motif 1.2.
HP–UX 10.2 also complies with IS 9945/1 and Base Com-
ponent and all Optional Components except XTI only.
Version 11 Release 5 (X11R5), OSF/Motif 1.2
C/ANSI C, C++
FORTRAN 9000
Pascal
PA–RISC 1.1 Assembler
COBOL
HP VUE 3.0
X11R5, PEX, PHIGS
Starbase capabilities
HP PowerShade
5–digit sequential identifying number.
Country of Manufacture Code:
Introduction Date Code:
A = U.S.A.
J = Japan
G = Germany
First 2 digits + 60 = last 2 digits of year.
Last 2 digits = number of week in year.