Removing The Old System Board - HP Visualize B1000 Supplementary Manual

Figure 2-34. Cable locations
CD ROM Drive
Data Connector
Top Sys. Board Fan
Power Connector
Floppy Drive
Data Connector
Bottom Sys. Board Fan
Power Connector
Ultra 2 Wide LVD
SCSI Connector
2. Inspect the system board to ensure that all cables are disconnected.
NOTE The DIMMs are shown for orientation purposes.

Removing the old System Board

1. Ensure all workstation cables are out of the way to avoid interference or damage when
you remove the system board tray.
Chapter 2
Parts Removal and Replacement
Removing and Replacing the System Board
I/O Fan
Power Connector
Speaker Connector
Front-Panel Display
Connector
CD ROM Drive
Cable Connector
Power
39