HP Visualize B1000 Supplementary Manual page 24

Visualize b class and c class unix workstations

Hide thumbs Also See for Visualize B1000:

Table of Contents

Parts Removal and Replacement

PCI I/O Cards

2. Looking down on the PCI I/O cards, replace the bulkhead screw for each PCI I/O card.

Figure 2-19. Inserting the PCI I/O Cards' Bulkhead Screws

3. Repeat Steps 1 and 2 above to install all the PCI I/O cards.

NOTE

Refer to the PCI I/O slot label on the air divider.

Bulkhead screws

(insert from inside)

Typical PCI ICard

Chapter 2

Table of Contents

Visualize c3600 Visualize c3000