Table of Contents
Advertisement
TV Control
Using Your Remote Control
-For European countries
-For countries outside Europe
For European countries
Remote Control Diagram
Remote Control menu
10
11
12
To set the TV temporarily to standby
mode. To switch on the TV set, press
Programme button (CH-, +), any digit
1
Standby
between 0 and 9 or AV source button
(The amber light indicates when set is in
standby mode)
For direct access to pr o grammes
For a 2-digit programme number, the 2nd
digit must be entered before the dash
Numerical
2
disappears.
keys
In PC/Video 'STANDBY' mode, press any
of number keys to return to 'ON' in TV
mode.
To turn on or off the OSD
( On-Screen Display)
3
Menu
To return to last item in OSD & clear menu
from screen
To adjust the sound level.
To access the sub -menus and adjust the
4
Volume
settings.
Previous
5
To access the last programme viewed.
programme
To select PC, TV, AV, S-Video and HD
mode.
6
SOURCE
In PC 'standby' mode, press SOURCE to
switch to TV mode.
To disable sound.
7
Mute
To restore sound, press button again.
To switch from STEREO to MONO or to
choose between Dual I and Dual II for
bilingual transmissio n s.
8
Audio Mode
For TV sets fitted with NICAM reception,
depending on the transmission, you can
switch from NICAM STEREO to MONO or
choose between NICAM DUAL I, NICAM
DUAL II and MONO.
To move up or down a programme.
To move the cursor up/down to scroll
Selecting TV
9
through a list of options.
programmes
In PC/Video 'Standby' mode, press CH+/ -
to return to 'on' in TV mode.
OSD
To show OSD status.
To select the period of time after which the
Sleep timer
set will switch automatically to standby
mode (up to 240 minutes)
To switch between Standard Mode, 4:3
Mode, Full Screen Mode and Nonlinear
Screen mode
Scaling Mode video format for optimum
viewing ratio.
170T4
13
Go to cover page
Advertisement
Table of Contents
