A Final Test; Draw A Circle Around Each Correct Answer - HP Vectra XA6 Supplementary Manual

book.bk : 1chaa.fb4 Page 14 Tuesday, June 25, 1996 1:53 PM

A Final Test

Draw a Circle Around Each Correct Answer

Draw a Circle Around Each Correct Answer
1 What is needed when replacing an HP Vectra VA system board?
a a new system board
b a new processor chip
c a new VRM
d new video memory chips
e an extraction tool
f a BIOS diskette.
2 An HP Vectra VA MT, supplied with a 1.2 GB hard disk, has been up-
graded by the user, but now no longer works. Which of the following could
be the source of its failure to operate properly?
a It has been fitted with a P6S/200 Pentium Pro processor.
b There is an 8 MB EDO memory module in memory socket A1, and an
8 MB FPM module in A2.
c Memory sockets B1 and B2 are empty.
d There is a 16 MB EDO memory module in memory socket C1, but
socket C2 is empty.
e A 850 MB IDE hard disk drive has been fitted in the lowest front-access
shelf, and has been connected to the spare grey IDE socket.
f A network board has been installed in a PCI slot.
3 What do you need to do to update the System BIOS on an HP Vectra XA?
a Make sure that you have a bootable diskette.
b Download a file whose file-name is of the form
c Download a file whose file-name is
d Download some other file.
e Set SW6 (clear configuration data) to
f Set SW7 (clear all passwords) to
g Set SW9 (clear product identification field) to
14
GZxxxx.FUL
.
PHLASH.EXE
.
Closed
.
Closed
.
Closed
.