Usb Connector - HP Vectra XA5 Supplementary Manual

• The Intel Inside label. Only models containing an MMX (P55C) processor
have the MMX logo (shown at the top left of the previous page).
• The BIOS version number. This is displayed at the top of the summary
screen (obtained by typing
played during the Power-On Self Test phase).
Model
HP Vectra XA 5/xxx PC
HP Vectra XA 6/xxx PC
• The ultimate solution is to release the lever on the zero insertion force
(ZIF) socket, and to remove the heat-sink and processor together, as a
single unit. Look at the underside of the processor. Only P55Cs are
marked with the words "MMX
Precautions When Replacing the Power Supply
With the minitower package, always check the position of the voltage
selection switch.

USB Connector

The HP Vectra XA 5/xxx and VL 5/xxx Series 5 PCs are the first Vectra PCs
to have a pair of USB connectors fitted as standard. When devices become
available on the market, they can be activated from the Setup program.
Precautions When Replacing the Power Supply
whilst the initial Vectra logo is being dis-
Processor
Pentium P54CS or MMX P55C
Pentium Pro
TM
tech".
HP Vectra XA 5/xxx PC
BIOS Version Number
HA.07.xx
GZ.07.xx
7