For More Information - HP Vectra VL6 7 User Manual

2 How to Install Accessories In Your PC

For More Information

At the rear of the PC, unscrew the retaining bracket (you can use a
•
coin to do this) and remove it.
Find a free slot. Some boards may have preferred locations and
•
special installation instructions detailed in their manuals.
Align the board's connector with the slot's socket and firmly press
•
into the socket. Ensure the board's connector engages completely
with the socket and does not touch components on other boards.
Secure the board by replacing the retaining bracket at the rear of the
•
PC. Ensure that all accessory boards and slot covers are correctly
aligned and firmly secured by the bracket.
For More Information
For more detailed information about installing accessories, refer to the
Upgrade and Maintenance Guide for your PC (which is part of the
MIS Kit described on page 40). The Upgrade and Maintenance
Guide contains detailed instructions for:
Moving and replacing the power supply
•
Installing a 3.5-inch hard disk drive in an internal rear shelf
•
Installing a 5.25-inch hard disk drive in the internal front shelf
•
Installing a Zip drive, CD-ROM drive, or tape drive
•
Installing and configuring accessory boards.
•
34 English