Connecting The Power Cables - HP Vectra VL6 7 User Manual

WARNING
Some Models Have a
Voltage Selection Switch
1 Setting Up and Using Your PC

Connecting the Power Cables

Connecting the Power Cables
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cable with a properly grounded plug such
as the one provided with this equipment or in compliance with your
national regulations. This PC is disconnected from the power by
removing the power cable from the power outlet. This means the PC
must be located close to a power outlet that is easily accessible.
1 Some models have a voltage selection switch, as shown in the
diagram below.
If your PC does not have a voltage selection switch, go directly to
step 2.
If your PC does have a voltage selection switch:
a Remove the warning label covering the computer's power
connector.
b
Ensure that the voltage setting is correct for your country.
(The voltage is set during manufacture and should be already
correct.)
12 English
Voltage
Selection
Switch