HP Vectra VL6 7 User Manual page 19

Stopping Your PC in
Windows NT 4.0 or
Windows 95
After Your PC Has Restarted
Set the keyboard to a comfortable position.
Adjust the display screen's brightness and contrast to suit your
needs. If the picture does not fill the screen or is not centered, adjust
it using the controls on the display. Refer to the display's manual for
details.
Changing the Operating System
If you change the operating system used by your PC, ensure that the
PnP Operating System
you are using the preinstalled operating system, this field should
already be correctly set.
If you are using a Plug and Play operating system such as Windows 95,
set the
PnP Operating System
program to .
Yes
For non-Plug and Play operating systems, such as Windows NT 4.0, set
this field to . To check if the your operating system is Plug and Play,
No
refer to the operating system documentation. (To enter the PC's Setup
program, press
Stopping Your PC
To stop the PC, make sure that you have exited all programs and the
operating system (if necessary), and then press the power button on
the control panel.
With some operating systems, such as Windows 95 or Windows NT 4.0,
the PC will automatically switch off when you shut down the operating
system.
Refer to the operating system manual for details of how to shut down
or exit the operating system.
field in the Setup program is correctly set. If
field in the
during start-up.)
1 Setting Up and Using Your PC
Starting and Stopping Your PC
menu of the Setup
Main
English 17