System Board Connectors, Jumpers, And Switches - HP Vectra VL5 3 User Manual

System Board Connectors, Jumpers, and Switches

# $ K +
Processor Voltage Selection Jumper (J27)
Jumper Function
Position VCC Select the VCC voltage for an upgrade processor
Position VR
Select the VR voltage for an upgrade processor
Position VRE Select the VRE voltage for an upgrade processor
System Board Switches
Switch Use Switch Block to:
1 - FLASH Enable or prevent system ROM updates using the
HPROMInit utility:
OFF to enable system updates
ON to disable system updates.
2 - RESERVED
3 - CONFG Retain or clear the configuration stored in EEPROM:
OFF to retain configuration
ON to clear configuration.
4 - PSWRD Enable or clear (and disable) User and System
Administrator Passwords stored in EEPROM:
OFF to enable passwords
ON to clear passwords.
5 - PARIT Enable or disable parity for the main memory modules:
OFF to disable parity for the main memory modules
DEFAULT
ON to enable parity for the main memory modules.
6 - RESERVED
7 - RESERVED
8 - RESERVED
#
SystemBoardConnectors.Jumpers.andSwitches.9
$
System Board Connectors, Jumpers, and Switches
K
System Board Connectors, Jumpers, and Switches;system board;jumper location;switch
location
+
SECTION1:0025
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
92
{bmc help0002.wmf}
DEFAULT
DEFAULT
DEFAULT
DEFAULT