Names And Functions Of Parts; Front View - NEC Express5800/GT110e EXP280A User Manual

Chapter 1 General Description
4.

Names and Functions of Parts

This chapter describes the names of the server parts.
4.1

Front View

(1)
(1) Front Bezel
This cover protects the front part of the server. Open the
upper door to access the optical disk drive or the bay.
(2) USB connectors (front)
These connectors are used to connect devices that support
the USB interface.
(3) Optical disk drive
Either of the following drive can be installed.
– DVD-ROM drive
– DVD SuperMULTI drive
The drive provides the following: an eject button to eject the
tray; an LED that indicates hard disk drive access; and an
eject hole for forcibly ejecting the tray
(4) 5.25-inch Expansion Bay
The bay where two drives such as optional DAT drives can
be installed.
32
(9)
(5) Disk Access LED (green/amber)
This LED lights or flashes green when the internal hard disk
drive or optical disk drive is being accessed.
The LED lights amber if a hard disk drive error occurs.
(6) POWER LED (green/amber)
After the power cord is connected, this LED lights amber
during initialization of system.
This LED lights green when the power is ON.
(7) POWER Switch
The switch to turn the server on and off. Press once to turn
on the server. POWER LED lights green when it is on.
Press it again to turn off the server. Hold down the switch
for 4 seconds or more to forcibly turn off the server.
(8) STATUS LED (green/amber)
This LED indicates the server status. It lights green when
the server is operating normally. If an abnormality is
detected, it turns on or flashes amber.
(9) Bezel Lock Tabs (3 at side of Front Bezel)
Tabs to secure Front Bezel. Pull toward outside when
disengaging Front Bezel.
Express5800/GT110e User's Guide
4. Names and Functions of Parts
(4)
(3)
(7)
(6)
(5)
(8)
(1)
(2)