Removing And Replacing The Cover And Front Panel - HP Vectra VEi8 Supplementary Manual

Removing the Cover

Removing and Replacing the Cover and Front Panel

Before removing the cover, switch off the monitor and PC, disconnect
all power cords and any telecommunication cables. If necessary, unlock
the cover at the rear of the PC.
1 Undo the three thumb screws at the back of the PC and remove the
cover by sliding it towards you by about 2 cm (0.8 inches) and then
lifting it off.
2 If required, remove the front panel. To remove the panel, lift the two
retaining catches, then tilt the panel forwards and lift it off.
Removing and Replacing the Cover and Front Panel