Life Fitness Arc Trainer Assembly Instructions Manual page 39

7. Remove a screw and washer from the right handle assembly using two 7/32" Allen wrenches.
8. Slide pivot pin assembly out and remove right handle assembly.
9. Rotate right handle assembly 180 degrees.
10. Apply Loctite to threads inside the pivot pin and screw.
11. Place right handle assembly in position and slide pivot pin assembly back in place.
12. Install the screw and washer to the right handle assembly using two 7/32" Allen wrenches.
Install Left Linkage Rod
1. Pivot left handle assembly up and slide left linkage rod onto left arm.
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16" Allen wrench.
4. Tighten screw to a minimum of 90 in-lbs.
Item
1
2
3
4
5
Item
1 Screw, Socket Head, .250-20 UNC-3A SS
10.2 Nm (90 in. lbs. minimum)
2
3 Washer, Flat, .281 ID x .500 OD x .062"
4
5
6
7
Page 37 of 47
Description
Screw
Washer
Handle Assembly, Right
Pivot Pin Assembly
Loctite #242
Description
Loctite #242
Linkage Rod Cap 2.00 OD
Flange Spacer
Left Arm
Left Linkage Rod
Qty
1
1
1
1
1
Qty
1
1
1
1
1
1
1