Life Fitness Arc Trainer Assembly Instructions Manual page 33

Attach Console and Console Cover
These steps apply to the Discover SE3 / SE3HD / ST consoles.
1. Insert grommets into console weldment.
2. Attach console. Press back cover into spring tab holes of console weldment. Secure back cover to console
weldment.
Discover Console
NOTE: The ground wire is connected to the console
weldment. Plug into console.
Item Description
1 Grommets
2 Console Weldment / Spring Tab Holes on Console Weldment
3 Console
4 M4.2 X 19 Phillips Pan Head Screw
1.5 Nm (1.1 ft. lbs.)
5 Cover, Console Back
6 Ground Wire
Page 31 of 47
Qty
2
1
1
6
1
1