Using The Battery - VeriFone E235 Installation Manual

Hide thumbs Also See for E235:
Table of Contents

Advertisement

To manually shut down, hold the red key down for about 4 seconds until the
device screen stays blank.
NOTE
The e235 device will only operate when the battery is installed unless connected
to AC power, for example, in a stand.
Using the
The e235 device uses a single-cell Li-ion battery with the following features:
Battery
The battery has a safety circuit that:
The battery provides power to the security circuit when the e235 device has
no external power source.
Li-ion batteries are not affected by shallow charging.
Follow these best practices for best function:
Conserve battery power by turning the e235 device off when not in use.
Keep the Li-ion battery inserted in the device and power up the device
periodically to check the battery charge. Do not let the battery charge fall
below 10% for an extended period of time as this may permanently diminish
battery capacity.
Recharge the battery by connecting the USB-C end of the power pack to the
device and plugging the other end of the power pack into a wall outlet.
The e235 device automatically shuts off when the battery reaches the critically
NOTE
low charge state. If this occurs, the battery must be recharged for a minimum of
1/2 hour before it can power the device. It may take several recharges attempts
to reset the safety circuit when charging a battery that has been discharged
below this critical state.
Dispose of the battery pack/coin cell in accordance with all national, state, and
local laws and regulations as regionally required. Some batteries may be recycled
and may be accepted for disposal at local recycling centers.
CAUTION: There is a risk of explosion if the battery is replaced by an incorrect
type.
ATTENTION: Il existe un risque d'explosion si la batterie est remplacée par un
modèle incompatible
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
Prevents cell damage from overcharge, over-discharge, or overheating.
Activates when the battery is left in an unused state for an extended
periods.
D
S
EVICE
ETUP

Using the Battery

235 I
G
E
NSTALLATION
UIDE
17

Advertisement

Table of Contents
loading

Table of Contents