Picture Mode; Digital Out - Teac DV-L800 Owner's Manual

D
VIDEO AUDIO
TV DISPLAY
TV TYPE
VIDEO OUTPUT

PICTURE MODE

SET VIDEO OUTPUT
E
VIDEO AUDIO

DIGITAL OUT

96K LPCM OUT
DOWN MIX
PRO LOGIC
AUDIO DRC
56
DISC
SYSTEM
4:3 PS
PAL
S-VIDEO
AUTO
DISC SYSTEM
BITSTREAM
96K
LT/RT
OFF
OFF
Settings 3
D
Picture Mode
This setting is accessible only when SETUP MENU MODE is
set to EXPERT (p.64).
This integrated solution takes advantage of utilizing the
embedded flag information in the MPEG stream and makes
the proper compensation for re-construction of the
progressive frame.
AUTO:
This deinterlacing mode is controlled purely based on the
progressive/interlace flag information embedded in the
bitstream. If the source is flagged as progressive, then the
"weave" method is used to deinterlage the film source. If
flagged as interlace, then the "bob" method is used. If both
progressive and interlace flags exist in the same bitstream,
then it will default to interlace source mode.
FILM:
Regardless of the progressive/interlace flag information
embedded in the bitstream, the deinterlacer will always
assume the video source as progressive and process the
information by the "weave" deinterlacing methond.
VIDEO:
Regardless of the progressive/interlace flag information
embedded in the bitstream, the deinterlacer will always
assume the video source as interlace and process the
information by the "bob" filtering method.
SMART:
Regardless of the progressive/interlace flag information
embedded in the bitstream, the deinterlacer will always
assume the video source as progressive.
Additional multi-tap vertical filtering is applied. Smart mode
is an excellent mode to use for progressive and interlaced
material with limited motion.
SSMART (Super Smart):
This mode enables the MPEG proprietary advanced pixel-
based motion- adaptive algorithm for high quality video
deinterlacing. SuperSmart mode conbines temporal and
spatial information with additional multi-tap medium filtering
to accurately reconstruct 480P video from any source
format. With the combination of flag reading and pixel-based
motion-adaptive processing, SmartScan accurately
recreates the most perfect progressive video to be
displayed on a 480P TV. This is the best mode to use for
deinterlacing interlaced or progressive source materal.
E
Digital Out
OFF:
Select this when you don't use the DIGITAL OUT terminal.
No signal is output from the DIGITAL OUT terminal.
BITSTREAM:
Select this when the unit is connected to an audio
component equipped with a built-in Dolby Digital or DTS
decoder via the DIGITAL OUT terminal.
PCM:
Select this when the unit is connected to an audio
component such as amplifier/receiver, CD recorder or MD
deck via the DIGITAL OUT terminal.
ENGLISH