Panasonic SA-HT880GC Service Manual page 34

SA-HT880GC / SA-HT880GCS / SA-HT880GS
Error Code
F890 Sending message when message is
being sent to AV task
F891 Message couldn't be sent to AV task Begin sending message to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language area abnormality
F896 No existence model
F897 Initialize is not completed
F898 Disagreement
software
F8A0 Message command is not appropriate Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
Error Content
Sending message to AV task
Firm version agreement check for factory preset setting failure prevention
Firm version agreement check for factory preset setting failure prevention
Initialize completion check for factory preset setting failure prevention
of hardware and Unsuitable combination of AV DECORDER, SDRAM and FLASH ROM
(firmware)
Additional error explanation
34