Vip-Vcm Maintenance; Pc Connection; Local Recording - Stanley SCSS-700 Installation & Operation Manual

9.9

VIP-VCM Maintenance

This programming menu option enables the user to add and edit the user message stored in the
VIP-VCM. See VIP-Series Installation Manual P/N 53796 for more information.
1. Enter the installer code.The panel will automatically go to the main menu.
2. Select for Panel Programming.
Display reads:
3. Select for VIP-VCM Maintenance.
9.9.1

PC Connection

This option is used when adding or editing user message through the 7780 SKE Voice
Evacuation Software.
4. Connect the computer to the VIP-VCM via the serial ports.
5. Run the 7780 software.
6. Select .
7. Through the 7780 software add or edit the system messages.
9.9.2

Local Recording

Select this option if you wish to record the user message with the VIP-VCM microphone, or
through the sound card of your PC. Refer to Section 4 of the VIP-Series Installation Manual
P/N 53796or more information on this procedure.
8. Select .
9. Select the module you wish for play back
10. Select the circuit of the selected module you wish to hear the message played back on.
11. Record the user message.
53722
Initializing
Please wait...
Programming
9-43