Dealer Responsibilities; Craft Identification Number (Cin); Warranty Information - Quicksilver 675CR Owner's Manual

Introduction

4. Dealer Responsibilities

In addition to a pre-delivery check and service of the boat, your dealer is to provide:
•
A description and demonstration of the safety systems, features, instruments and controls on
your boat
•
An orientation in the general operation of your boat
•
A review of all warranty information and how to obtain warranty service
•
The Owner Information Package
If you do not receive all of these materials, or have any questions, contact your dealer.

5. Craft Identification Number (CIN)

The Craft Identification Number is located either on the starboard side of the transom, or on the aft
starboard side of the hull under the gunwale if the boat has an optional swim platform, and is your
boat's most important identifying factor. The CIN must be included in all correspondence related to
the vessel. Also of vital importance is the engine serial number(s) and part number(s) when ordering
parts for your engine.
6. Warranty
You will find information regarding the Quicksilver® warranty following the introduction. A warranty
information card is also included in the owner information packet. If for some reason this information
is missing, contact your Quicksilver® dealer.
Registration
Contact your dealer or the distributor in your country, or the Brunswick Marine in EMEA Center
closest to you.
Transfer of Warranty
Contact the distributor in your country, or the Brunswick Marine in EMEA Center closest to you.
CIN Locations
vii