Cockpit Table; Sun Lounge (Optional) - Quicksilver 675CR Owner's Manual

Table of Contents

Quicksilver 675CR— System & Component Overview and Operation

17. Cockpit Table

Your boat is equipped with a cockpit table. You will either have a standard plastic table or an optional

teak table. To install the table, first remove the plastic cover located in the table base plate. Next,

push and lock the table leg into the base plate. Finally, place the table onto the table leg. When not in

use, the table can be placed in a canvas bag and both the table and table leg are stored in the port

side of the cabin.

Cockpit Table

The cockpit of the 675CR can be transformed into a sun lounge using the teak table as the filler board.

First remove the plastic cover located in the table base plate, and install the short table leg into the

base plate. Next, install the table onto the table leg, and then place the forward sun lounge filler into

place. Make sure that you insert the two tabs (located on the bottom side of the forward sun lounge

Cockpit Sun Lounge

Table base

Table leg

Plastic table

Teak table

Table base

Short table leg

Table

Forward filler board

Sun lounge cushion

Support leg

Tab

Receiver

Table of Contents