Integrated Peripherals - Abit ZH6 User Manual

3-30

3-8. Integrated Peripherals

In this menu, you can change the onboard I/O device, I/O port address and other hardware
settings.
Figure 3-8. Integrated Peripherals Menu
Onboard IDE-1 Controller:
The onboard IDE 1 controller can be set as Enabled or Disabled.
✏ ✏ ✏ ✏ Master Drive PIO Mode:
➤ ➤ ➤ ➤ Auto: The BIOS can auto-detect the transfer mode of the IDE devices in order to set
its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to set its data
transfer rate.
✏ ✏ ✏ ✏ Slave Drive PIO Mode:
➤ ➤ ➤ ➤ Auto: The BIOS can auto-detect the transfer mode of the IDE devices in order to set
its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to set its data
transfer rate.
✏ ✏ ✏ ✏ Master Drive Ultra DMA:
Ultra DMA is a DMA data transfer protocol that utilizes ATA commands and the ATA
bus to allow DMA commands to transfer data at a maximum burst rate of 33 MB/sec.
ZH6
Chapter3