Abit ZH6 User Manual page 38

3-12 Chapter3
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache. When the external cache is
enabled, the system works faster. The default is Enable.
CPU Level 2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC checking function.
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard will run a series of
tests in order to check the system and its peripherals. If the Quick power on self-test feature
is Enable, the BIOS will simplify the test procedures in order to speed up the boot process.
The default is Enable.
Boot Sequence:
When the computer boots up, it can load the operating system from the floppy drive A, hard
drive, SCSI drive or CD-ROM. There are many options for the boot sequence:
➤A, C, SCSI
➤C, A, SCSI
➤C, CD-ROM, A
➤CD-ROM, C, A
➤D, A, SCSI (At least 2 IDE HDD can be used)
➤E, A, SCSI (At least 3 IDE HDD can be used)
➤F, A, SCSI (At least 4 IDE HDD can be used)
➤SCSI, A, C
➤SCSI, C, A
➤A, SCSI, C
➤LS/ZIP, C
Swap Floppy Drive:
This item can be set as Enable or Disable.
When this feature is enabled, you don't need to open the computer case to swap the position
of floppy disk drive connectors. Drive A can be set as drive B and drive B can be set as drive
A.
ZH6