Using The Hp Setup Program - HP Kayak XM600 User Manual

Main Advanced
BIOS Version:
PnP OS
Reset Configuration Data:
System Time:
System Date:
Key Click:
Keyboard auto-repeat rate speed:
Delay before auto-repeat:
Numlock at Power-on:
Æ
F1 Help
Ä
ESC Exit

Using the HP Setup Program

Use the Setup program to configure your PC Workstation (for example:
setting up system and user passwords, installing and upgrading mass
storage devices), and to solve configuration problems.
It is recommended that you take note of any changes to the system setup.
Starting the HP Setup Program
1 Turn on the display and then the PC Workstation. If the PC Workstation
is already turned on, save your data and exit all programs, then restart
the PC Workstation.
2 Press while
If you fail to press
will need to restart your PC Workstation and go through the POST again
so you can press
The opening screen, similar to the one shown below of the PC Workstation's
Setup program, is displayed. The band along the top of the screen offers
the following menus: Main, Advanced, Security, Boot, Power and Exit. A
menu is selected by using either the left or right arrow keys.
PhoenixBIOS Setup Utility
IC.11.XXa
[No]
[No]
[14:42:33]
[01/08/1999]
[Disabled]
[21.8 per Second]
[0.50 Second]
[On]
Ç
Select Item
Å
Select Menu
Setup is displayed at the bottom of the screen.
in time and the start-up process continues, you
.
Security Boot
F7/F8 Change Values
Enter Select > Sub-Menu
1 Setting Up and Using Your PC Workstation
Using the HP Setup Program
Power Exit
Item-Specific Help
.
F9 Setup Defaults
F10 Previous Values
17