Computer Setup-Power - HP Elite 7000 Microtower Setup Manual

Table 2 Computer Setup—Advanced (continued)
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
SATA Controller Mode
SATA Controller
Onboard LAN
Onboard LAN Boot
ROM
Onboard WLAN
Onboard 1394
Supervisor Password
User Password
Onboard Audio
ESC:Boot Menu
F9:Diagnostics
F10:Setup
F11:Recovery
F12:Boot from LAN
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option
After AC Power Failure Allows you to select system restart behavior after power loss:
ENWW
system:
● Integrated (Onboard)
●
PCI-E
If SATA Controller is enabled, allows you to set the mode to:
●
IDE
●
AHCI
●
RAID
Allows you to disable/enable the SATA Controller.
Allows you to disable/enable onboard LAN controller.
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Allows you to disable/enable onboard WLAN controller.
Allows you to enable/disable all 1394 ports.
Allows you to establish, disable, or change the supervisor password.
Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Allows you to set the onboard audio to:
● Auto
●
Disabled
● Enabled
Allows you to enable/disable the option to press the
computer startup.
Allows you to enable/disable the option to press the
computer startup.
Allows you to enable/disable the option to press the
computer startup.
Allows you to enable/disable the option to press the
computer startup.
Allows you to enable/disable the option to press the
during computer startup.
Description
● Stay Off
●
Power On
● Auto
Esc key to access the Boot menu during
F9 key to access the Diagnostics menu during
F10 key to access the Setup menu during
F11 key to access the Recovery menu during
F12 key to access the Boot from LAN option
Computer Setup (F10) Utilities 3