Upgrading Graphics
Memory
Installing Additional
Drives
5-8
Reference Guide
1. Turn off the computer and disconnect the power cord from
the electrical outlet.
2. Remove the computer cover.
3. Remove the screw at the top of the expansion slot and
remove the graphics controller board.
4. Place the graphics board on a grounded, flat surface and
install the upgrade memory module.
Installing a Graphics Memory Upgrade Module
5. Replace the graphics board into the same expansion slot.
6. Replace the screw into the expansion slot.
This computer contains available drive bays for optional drives.
Contact your local Compaq authorized service provider for
information on upgrading your computer.