Installing A Dimm - HP Deskpro 1000 Reference Manual

Installing a DIMM

1. Turn off the computer and disconnect the power cord from
2. Remove the computer cover.
3. Press outward on both latches 1 of the DIMM socket at the
4. A memory module can be installed in only one way. Match
Installing a DIMM Module
5. Repeat steps 3 and 4 for each module that you want to
CAUTION:
When handling a memory module, be careful not to
touch any of the contacts. Doing so may damage the module.
the electrical outlet.
same time and insert the memory module 2 into the
socket.
the notch on the module with the tab on the memory
socket. Push the module down into the socket, ensuring
that the module is fully inserted and properly seated 3.
install.
After all memory modules are installed, replace the
computer cover, plug in the computer power cord, and turn
on the computer. The computer recognizes system memory
upgrades and automatically reconfigures the computer.
Reference Guide 5-7