HP Compaq t5720 Hardware Reference Manual page 17

Hardware Reference Guide
3. Verify the location of the round opening on the flash memory
card and align the opening with the plastic stem on the system
board.
4. Insert the new flash memory with the connectors facing down as
shown in the following illustration.
Installing flash memory
5. Complete steps 6 through 8 of the
sequence" on page
6. Install the thin client software. For installation instructions, refer
to the Troubleshooting Guide or the HP Compaq Thin Client
Imaging Tool white paper available on the HP Web site at
www.hp.com/products/thinclientsoftware
www.hp.com
"General hardware installation
2-1.
.
Hardware upgrades
2-5