Specification - Sangean DT-400WAM Manual

Change AM (MW) band tuning step
In Europe and other parts of the world, AM (MW) tuning step are 9
kHz, in America the AM tuning step is
10 kHz.
To change the AM tuning step from 10 kHz to 9 kHz, proceed as
follows:
1. Press Tuning Down button and hold meanwhile press the Power
button and hold.
2. Until the display shows SEP 9 then shows 522.
3. The AM frequency step is 9kHz now.
To change the AM tuning step from 9 kHz to 10 kHz, proceed as
follows,
1. Press Tuning UP button then Power button and hold meanwhile
press the Power button and hold.
2. Until the display shows SEP 10 then shows 520.
3. The AM frequency step is 10kHz now.

Specification

FM: 87.5 - 108.0 MHz,step 100k
AM: 522 - 1629 kHz,step 9k
520 - 1710 kHz,step 10k
WX: USA 1-7ch with alert
10
If at any time in the future you should need to dispose of
this product please note that: Waste electrical products
should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Au-
thority or retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive)