Download Print this page

Factory Reset; Specification - Sangean DT-140 Manual

Advertisement

Factory reset

If you wish to completely reset your radio to its initial state this may be performed by the following
procedure. By performing a factory reset, all user entered settings will be erased.
1.
Turn off the radio.
2.
Press and hold Preset 3 button and the Band button at the same time, the "dEF" will appear
and flash on the display. Continue holding down these two buttons until all the icons appear
on the screen. Now the factory reset is completed.

Specification

Power Requirement
Battery
Battery Life
Frequency Coverage
FM
AM
Output Power
Earphone Jack
※ The barcode label on the product is defined as below:
The Company reserves the right to amend the specifications without notice.
If at any time in the future you should need to dispose of this product please note that: Waste
electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive).
Lithium-ion rechargeable battery 3.7V 930mAh
Approx 24 hours of listening with earphones for 4 hours a day
at normal volume level.
87.5-108 MHz
522-1710 kHz (9kHz)
520-1710 kHz (10kHz)
1.0mW + 1.0mW
3.5mm diameter (stereo)
Serial number
Production month
Production year
Product code
GB
F
E
NL
D
06

Advertisement

loading