Abit AB-BE6 Manual page 52

3-24
Doze = 1 hour
Standby = 1 hour
Suspend = 1 hour
Max Saving
When the three saving modes are enabled, the system is set up for maximum power
savings.
Doze = 1 minute
Standby = 1 minute
Suspend = 1 minute
Disable
Disable the power management function.
PM Control by APM:
Power Management is completely controlled by the APM.
APM stands for Advanced Power Management, it is a power management standard set by
Microsoft, Intel and other major manufacturers.
Video Off Method:
Three video off methods are available: "Blank Screen", "V/H SYNC + Blank" and "DPMS".
The default is "V/H SYNC + Blank".
If this setting does not shut off the screen, select "Blank Screen". If your monitor and video
card support DMPS standard, select "DPMS".
Video Off After:
Select the saving mode in which the video is switched off.
NA
The video will never be switched off in no power saving mode.
Suspend
The video will only be switched off in Suspend mode.
Standby
The video will only be switched off in Standby or Suspend mode.
Doze
The video will be switched off in all power saving modes.
BE6
Chapter3