Supermicro X10DRT-PS User Manual page 70

X10DRT-PS Motherboard User's Manual
 CPU C State Control (Available when Power Technology
is set to Custom)
Package C State limit
Use this item to set the limit on the C-State package register. The options are
C0/1 state, C2 state, C6 (non-Retention) state, and C6 (Retention) state.
CPU C3 Report
Select Enable to allow the BIOS to report the CPU C3 state (ACPI C2) to the
operating system. During the CPU C3 state, the CPU clock generator is turned
off. The options are Enable and Disable.
CPU C6 Report (Available when Power Technology is set to Custom)
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the
operating system. During the CPU C6 state, power to all cache is turned off.
The options are Enable and Disable.
Enhanced Halt State (C1E)
Select Enable to use the "Enhanced Halt State" feature, which will significantly
reduce the CPU's power consumption by reducing CPU's clock cycle and voltage
during a "Halt State." The options are Disable and Enable.
 CPU T State Control (Available when Power Technology
is set to Custom)
ACPI (Advanced Configuration Power Interface) T-States
If this item is set to Enable, CPU throttling will be supported by the operating
system to reduce power consumption. The options are Enable and Disable.
Chipset Configuration
Warning! Please set the correct settings for the items below. A wrong configuration
setting may cause the system to malfunction.
North Bridge
This feature allows the user to configure the settings for the Intel North Bridge.
4-10