Confirming And Deleting A Fax Job - Canon imageCLASS MF5730 Basic Manual

Confirming and Deleting a Fax Job

Follow the procedure below to confirm the sending or receiving status.
1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <RX/TX STATUS> ➞ press [Set].
NOTE
•
If there is no job, <NO CURRENT RX/TX JOB> is displayed.
•
If there is only one fax job, go to step 4.
•
The transaction number and <TX/RX> in the LCD mean the following:
3
Press [((-)] or [)(+)] to confirm the transaction number and time.
NOTE
7
For the fax job with multiple destinations (sequential broadcasting), only the fax/
telephone number to be sent first is displayed.
4
If you want to delete the fax job, press [Set].
NOTE
If you delete the fax job with multiple destinations, the machine does not send the fax to
any of the destinations registered for the job.
5
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot
be restored.
6
Press [Stop/Reset] to return to the standby display.
NOTE
For detailed information on all fax features, see the Facsimile Guide.
7-2 Checking the Status of the Jobs Stored in the Machine
- <0001> to <4999>: A sent document (TX)
- <5001> to <9999>: A received document (RX)