Bluetooth Settings; Other Settings - Canon PIXMA MP450 User Manual

Bluetooth Settings

For details, see "Performing Bluetooth Communication" on page 70.
Device name
Specifies the name of this machine that is displayed on a Bluetooth compatible device.
Access refusal
When this is set to <ON>, the machine denies access from a Bluetooth compatible device.
Security
When this is set to <Enable>, the passkey can be specified.
Passkey
Changes the passkey.

Other Settings

Date display
Changes the display order for shooting dates to be printed.
Note
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Power save setting
The LCD goes out if the machine is not operated for 5 minutes. Press any button on the
Operation Panel except for [ON/OFF] to restore the display. Even though you can select from
<5 minutes>, <15 minutes>, <1 hour>, or <8 hours> as the time until power save starts, the
actual time until power save starts does not change.
Adjust contrast
Use this to adjust the contrast of the LCD if it is too low or too high.
74
Changing The Machine Settings
When <Print date only> or <Print date & file no.> is selected in the
<Settings 1> tab on the Settings screen (Memory card), the shooting
date is printed in the date display order you selected. For Print
settings, see "Changing The Print Settings" on page 26.
The shooting date format is as specified in the DPOF setting from
DPOF printing.
If you set this setting to <Read/write mode>, the operation for printing or
maintenance cannot be performed. After you finish operation of the
memory card dedicated drive, be sure to revert this setting to <Read-only
mode>.
Chapter 9