Canon PIXMA MP450 Start Here

Thank you for purchasing the Canon PIXMA MP450. To prepare your machine for use, please follow these
Easy Setup Instructions before referring to any other documentation.
IMPORTANT
Do not connect the USB cable until after the software is installed. See the reverse side of this sheet for
details.
1 Unpack the machine.
1
Carefully remove all items from the box.
2
Check the package contents.
• See the flapped lid of the packing box.
3
Place the machine on a flat surface.
4
Remove all shipping tape and the protective sheet.
5
Open the Scanning Unit and remove the protective material (A).
(A)
• Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension
or the Operation Panel.
2 Connect the power cord.
1
Connect the power cord.
2
Press [ON/OFF] to turn
ON the machine.
3
Use [ ] or [ ] on the Operation Panel to select the language on the LCD,
then press [OK].
• The language setting is only available for some countries.
3 Install the FINE Cartridge.
1
Lift the Scanning Unit and pull the Scanning Unit Support down into place.
IMPORTANT (US only)
• Write down the serial number. You will need this to register the product.
All manuals and user guides at all-guides.com
The cartridge
moves to the left.
Install the FINE
Cartridges here.
2
Prepare the FINE Cartridges.
Remove the protective tape.
3
Insert the FINE Cartridges.
4
Close the Scanning Unit.
• Lift the Scanning Unit to put the Scanning Unit Support back to its original position.
IMPORTANT
Wait until the preparatory operation is complete; this takes about one to two minutes.
4 Load the paper.
1
Open the Paper Support (1) and pull up the Paper Support Extension (2) until
it stops.
2
Load the paper with the print side face up.
• Ensure the paper stack does not exceed the Load Limit Mark (A).
3
Pinch and adjust the Paper Guide (3) to the width of the stack.
4
Open the Paper Output Tray.
(1)
The hardware setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on
installing the software.
© 2005 Canon Inc.
All products and brand names are registered trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
QT7-0008-V02 xx2005A
Do not touch!
(3)
(A)
(2)
© CANON INC. 2005 PRINTED IN VIETNAM