Faq - TP-Link TL-WA1201 User Manual

FAQ

Q1. How do I restore the access point to its factory default settings?
With the access point powered on, use a pin to press and hold the
the Power LED blinks, then release the button.
Note: Resetting the access point will clear all previous configurations, and the access point will reset to the default
Access Point mode.
Q2. What should I do if I cannot access the web management page?
• If the computer has a static IP address, change its settings to obtain an IP address
automatically.
• Verify that http://tplinkap.net
browser.
• Use another web browser and try again.
• Reboot your access point and try again.
• Power off your host AP and enter
Q3. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the access point. If the password
has been altered, please connect your computer to the access point using an Ethernet
cable and follow the steps below:
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Wireless > Wireless Settings
Q4. What should I do if I forget my login password of the web management
page?
1. Refer to Q1 to reset the access point to its factory default settings.
2. Visit http://tplinkap.net, and create a new login password.
Note: You'll need to reconfigure the access point to surf the internet once the access point is reset, and please mark
down your new password for future use.
Q5. What should I do if my wireless is not stable?
This could be caused by interference. You can try the following methods:
• Log in to the web management page. Go to
your wireless channel to a different one.
• Move the access point to a new location away from Bluetooth devices and other
household electronics, such as cordless phones, microwaves, and baby monitors, to
minimize signal interference.
or http://192.168.0.254
http://tplinkap.net
to retrieve or reset your wireless password.
Wireless
RESET
is correctly entered in the web
in the web browser to try again.
> Wireless Settings
button until
and change
59