8. 11. Test The Network Connectivity - TP-Link TL-WA1201 User Manual

Chapter 8
3. Click VIEW CONNECTED DEVICES
from the devices list, or enter the MAC address of the device manually.
4. Specify a Description
5. Click SAVE.

8. 11. Test the Network Connectivity

Diagnostics is used to test the connectivity between the access point and the host or
other network devices.
Ping is used to test the connectivity between the access point and the tested host,
and measure the round-trip time.
Traceroute is used to display the route (path) your access point has passed to reach
the tested host, and measure transit delays of packets across an Internet Protocol
network
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > Diagnostics.
• To test the connectivity via Ping:
1 ) Choose Ping
2 ) Enter the IP Address
3 ) Keep the default
4 ) Click START
and select the device to manage the access point
for this entry.
as the diagnostic tool.
or Domain Name
Ping Count and
to begin the diagnostics. The diagnostics result will be displayed.
of the tested host.
Ping Packet Size.
Manage Your Access Point
55