Canon PIXMA iP2000 Quick Start Manual page 74

Troubleshooting
Problem Possible Cause
If the ink tank has
been replaced with
Have you replaced
a new one
ink tank with a new
one? message is
displayed
If the Front Cover
has been open for a
certain period (the
ink tank has not
been replaced)
Low Ink Warning Failure to reset ink
Accompanied by Ink counter when
Tank Icon With '?' installing new ink
tank
70
Click Yes to reset the ink counter.
See "Resetting the Ink Counter"
Click No or Cancel on the dialog box described above.
You can choose the option to disable the diaplay of this confirmation message.
1. Ensure that the printer is turned on and open the P P rinter Properties dialog
box.
2. Click the M M aintenance tab and then click L L ow Ink Warning Setting.
3. Clear a check box of D D iaplay a confirmation message of ink tank replacement
and click Send.
The ink tank level accompanied by the ink tank icon with the "?" indicates ink
tank is not synchronized with its ink counter.
Always be sure to reset the ink counter in your printer driver when you replace
ink tank. See "R R esetting the Ink Counter"
A "?" is displayed next to the Ink counter between the time one ink tank is
removed and the ink counter is reset when the next one is installed. Display of
the "?" can be disabled by unchecking the D D isplay low Ink Warning check box.
1. Open the P P rinter Properties dialog box.
2. Click the M M aintenance tab and then click L L ow Ink Warning Setting icon.
3. Clear a check box of D D isplay low ink warning off and click S S end.
If you do not want to display the remaining ink level in the I I nk Level Information,
clear a check box of Display the remaining ink level.
1. Select A A pplications from the G G o menu.
2. Double-click the P P rinter Setup Utility icon in the U U tilities folder.
If you are using the OS other than Mac OS X v.10.3, double-click the P P rint
Center icon.
3. Select i i P2000 from the N N ame List and click U U tility or C C onfigure.
4. Select i i P2000 from the P P roduct list and click M M aintenance.
5. Select R R emaining ink Level setting from the pop-up menu.
6. Click R R emaining Ink Level Indicator Setting icon.
7. Clear a check box of D D isplay the remaining ink Level and click S S end.
Try This
on page 56.
on page 56.