Faq's - VocoPro Digital-2 Owner's Manual

Dual channel digital wireless system with mic-on-chip technology

FAQ's

1. WHY IS THERE NO MICROPHONE AUDIO?

• The mic volume is turned down.

• The connections from the Digital-2 recever and the sound system are disconnected.

• The microphone needs to be resynced with the receiver. Refer to "changing the frequency".

• The battery is too low.

• The microphone is muted. Press power button once to toggle the mute feature.

2. WHY WON'T THE MICROPHONE SYNC?

• The IR sensors are not aligned or within range when pairing. Be sure the microphone and

receiver sensors are aligned and within 4 inches of eachother. Power the micrphone off/on

to reset the microphone.

3. WHAT DOES "UP & DOWN" MEAN IN THE FREQUENCY ANALYZER?

• The UP & DOWN scan feature refers to the Frequency Analyzer searching above or below

the currently set frequency. Select up to find a higher frequency. Select down to find a

lower frequency.

4. I'M MISSING PARTS FROM THE BOX. WHAT CAN I DO?

• Please contact Vocopro at 1-800-678-5348 regarding any missing or defective parts.

Table of Contents