ResMed Mirage SoftGel User Manual page 9

•
At a fixed rate of supplemental oxygen flow, the inhaled oxygen
concentration varies, depending on the pressure settings, patient
breathing pattern, mask, point of application and leak rate.
•
The technical specifications of the mask are provided for your
clinician to check that they are compatible with the CPAP or bilevel
device. If used outside specification or if used with incompatible
devices, the seal and comfort of the mask may not be effective,
optimum therapy may not be achieved, and leak, or variation in
the rate of leak, may affect the CPAP or bilevel device function.
•
Discontinue using this mask if you have ANY adverse reaction to
the use of the mask, and consult your physician or sleep therapist.
•
Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult your
physician or dentist.
•
As with all masks, some rebreathing may occur at low CPAP
pressures.
•
Refer to your CPAP or bilevel device manual for details on settings
and operational information.
•
Remove all packaging before using the mask.
Cleaning your mask in the home
Your mask and headgear should only be handwashed by gently rubbing in
warm (approximately 30°C) water using mild soap. All components should
be rinsed well with drinking quality water and allowed to air dry out of direct
sunlight.
Daily/After each use:
•
To optimize the mask seal, facial oils should be removed from the cushion
after use.
•
Handwash the separated mask components (excluding headgear).
•
If the vent requires cleaning use a soft bristle brush.
Weekly:
•
Handwash the headgear. It may be washed without being disassembled.
2