Color Network Scangear - Canon imageCLASS MF5880dn Starter Manual

5 Set Up Computers and Software
6
If the firewall is applied to the
operating system, the dialog box
below appears. Click [Yes] and
continue the installation.
7
① Select your machine on the list.
Make sure that the machine
name is highlighted.
② Click [Next].
–
If nothing appears or your
machine does not appear in
[Device List], click [Update Device
List].
–
If your model does not appear
even after clicking [Update Device
List], click [Search by IP Address],
then specify the IP address of the
machine. For instructions on how
to check the machine's IP address,
see "Check IP Address Setting, " on
p. 13.
18
8
9
10
11
Select [Restart Computer Now
(Recommended)], then click [Restart]
to restart your computer.
12
Installation is complete.
If you continuously install Color
Network ScanGear, go to "Color
Network ScanGear, " on p. 18,
otherwise go to "Check Installation, "
on p. 21.
If you have several computers that
connect to the machine through a
network, repeat the procedure from
step 1 for each computer.

Color Network ScanGear

1
2
To install Color Network ScanGear
on Windows Server 2008, click [Start]
on the Windows task bar →
[Computer] → right-click the CD-
ROM icon and select [Open] →
[Color_Network_ScanGear] →
[Driver] → double-click [SetUp]
([Setup.exe]), then proceed to step 4.
3