Removing The Roll From The Printer - Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual

Removing the Roll from the Printer

Remove rolls from the printer as follows.
• If you need to cut a roll, see the following procedure.
(→"Specifying the Cutting Method for Rolls," User's Guide)
1
On the Tab Selection screen of the Control Panel , press
◄ or ► to select the Paper tab (
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper , and then press the
OK button.
4
Press ▲ or ▼ to select Yes , and then press the OK
button.
The roll is now rewound and ejected.
• If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed on the
leading edge of the roll.
• Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left. (→"Keeping Track of the Amount of Roll
Paper Left," User's Guide)
5
Open the Top Cover and lift the Ejection Guide .
).
18
Ready
OK: Paper Menu
Plain Paper
ISO A2 Roll