Convenient Printer Driver Features - Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual

Loading Rolls in the Printer
6
Lower the Ejection Guide .
7
Holding the edge of the roll paper, lift the Release Lever .
8
Hold the edge of the roll paper as you gently pull it evenly
with both hands to the position of the Ejection Guide
(a). Align the right side of the roll paper with the Paper
Alignment Line (b), keeping this side parallel to the line,
and then lower the Release Lever .
• Do not omit steps 7 and 8. If paper cannot be advanced straight or if it wrinkles, it may jam or rub
against the Printhead .
• Do not force the roll paper into alignment with the paper alignment line (b). This may prevent the paper
from being advanced straight.
• You can adjust the strength of suction holding paper against the Platen when the Release Lever is
released. If it is diffi cult to load paper, press the ▲ or ▼ button on the Control Panel to adjust the
strength. Set suction stronger by pressing the ▲ button or weaker with the ▼ button. Three settings are
available.
9
Close the Top Cover .
The paper is now advanced, and a menu for selection of
the type of paper is automatically shown on the Display
Screen .
a
16
b