Replacing The Printhead - Canon imagePROGRAF iPF8300 Basic Guide No.1 Basic Manual

Replacing the Printhead

Replace the Printhead as follows.
When to replace the printhead
This printer is equipped with two printheads.
Replace one or both printheads in the following situations.
• If the printing quality does not improve even after one or two cycles of Head Cleaning B from the printer
menu
Replace any printheads with poor printing performance.
• If the Display Screen indicates Open top cover and replace the left printhead.
Replace the Printhead on the left side.
• If the Display Screen indicates Open top cover and replace the right printhead.
Replace the Printhead on the right side.
• If your Canon dealer has advised you to replace the Printhead
Replace the Printhead as directed.
Compatible printheads
Use Printhead PF-05 .
Precautions when handling the printhead
Take the following precautions when handling the Printhead .
• There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during
replacement. The ink may stain clothing.
• Do not open the Printhead pouch until immediately before installation. After removing the Printhead from the pouch,
install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out, which may affect
printing quality.
36