Documentation Conventions - Canon imagePROGRAF iPF8300 Basic Guide No.3 Basic Manual

Preparing to Transfer the Printer
Pack the printer
1
Press the Power button and turn off the printer.
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
2
Disconnect the power cord, interface cable, and Media
Take-up Unit Power Inlet .
3
Open the Top Cover and lift the Ejection Guide .
4
Remove the four ejection supports and lower the Ejection
Guide .
6