Table of Contents
Advertisement
Introduction
This document describes tasks that must be completed or coordinated by the administrator of the Canon
imagePRESS Server B5000/B4000 before it is ready for use.
This document assumes that the imagePRESS Server has been unpacked from its shipping container and that all
required cables are connected from the imagePRESS Server to the network, a power source, and the printer, and that
the printer is operational.
If you are an administrator and plan to configure a imagePRESS Server, it is strongly recommended that you
carefully review this entire document, beginning with
Terminology, conventions, and documentation resources
This document uses the following terminology and conventions to refer to the Canon imagePRESS Server B5000/
B4000, printer, and supported operating systems.
Term or convention
Aero
Printer
imagePRESS Server
imagePRESS Server B5000
imagePRESS Server B4000
Mac OS
Windows
Warning:
Caution:
Important:
Refers to
imagePRESS Server (in illustrations and examples)
Canon imagePRESS C10000VP/C8000VP
Canon imagePRESS Server B5000/B4000
Canon imagePRESS Server B5000
Canon imagePRESS Server B4000
All supported Mac operating systems. For a complete list, see System Requirements in
Configuration and Setup.
All supported Windows operating systems. For a complete list, see System Requirements in
Configuration and Setup.
A warning concerning operations that may lead to death or injury to persons if not performed
correctly. To use the equipment safely, always pay attention to these warnings.
A caution concerning operations that may lead to injury to persons if not performed correctly.
To use the equipment safely, always pay attention to these cautions.
Operational requirements and restrictions. Be sure to read these items carefully to operate the
equipment correctly, and avoid damage to the equipment or property.
Stages of installation on the network
Configuration and Setup
Introduction
on page 10.
9
Advertisement
Table of Contents
