Available Documentation And Training - Canon Arizona 2300 Series Operation Manual

Available documentation and training

Available documentation and training
This manual provides the operator with information about the following Arizona 2300 series UV
flatbed inkjet printers:
• Arizona® 2340 GTF/XTF
• Arizona® 2360 GTF/XTF
• Arizona® 2380 GTF/XTF
Multi-Language Support
The printer's user interface software supports multiple languages. To select your preferred
language, see
This manual is available in other languages. You can download a PDF file of the manual in all of
the languages that we support from our websites: https://downloads.cpp.canon or https://
graphiplaza.cpp.canon.
Canon Production Printing on the Internet
For further information on documentation and support for your printer or for information on
other Canon Production Printing products, please visit our websites: https://downloads.cpp.canon
or https://graphiplaza.cpp.canon.
Safety Information
Safety information for handling inks, consumables, and operating the printer can be found in
Safety Information on page
Chapter
Customer Service
If your printer malfunctions and you are unable to resolve the problem, field service technicians
can be dispatched to your site to conduct repairs. Service visits are paid for by the customer,
either under a maintenance agreement, by purchase order or prepayment. Time and material
rates are charged for any service not covered under a maintenance agreement. Before calling to
report a problem, gather as much information about the problem as possible and have it ready to
provide to your customer care center.
Responsibilities of the Operator
The printer operator must be properly trained. Canon Production Printing provides training for
the operator in the use of the printer hardware and software at the time of installation. It is the
customer's responsibility to ensure that only properly trained personnel operate the printer.
Operators must be fully versed in the operation of ONYX Thrive
with this application an ONYX training is required. Training courses are available; contact your
local Canon Production Printing representative.
The operator or trained personnel are expected to handle all user maintenance and replacement
of consumable parts (except printheads), as detailed in the User Guide.
Responsibilities of the Service Technician
Field service technicians must have Canon Production Printing service training. The service
technician is responsible for all repairs, upgrading and modification requested by the customer or
mandated by the Canon Production Printing Service and Support Group. The service technician
who installs the printer will also provide training for the operator that covers all of the basic skills
required to operate the printer.
12 Chapter 1 - Introduction
Settings Module on page 55
15.
®
. For any operator unfamiliar