Menu Map - Canon imagePROGRAF iPF6300S Basic Guide No.2 Basic Manual

Large-format printers
Hide thumbs Also See for imagePROGRAF iPF6300S Basic Guide No.2:
Table of Contents

Advertisement

Error Message
Cannot adjust printhead.
Maximum jobs stored.
Mail box full. Now printing
without saving data.
The mail box is full.
Mail box nearly full.
Mail box full. Delete unwanted
data
Multi-sensor error
Cause
The Printhead nozzles are
clogged.
The Printhead cannot be aligned;
highly transparent film is loaded.
100 jobs are stored in the personal
box.
No more space is available on the
printer's hard disk, so jobs are now
printed without saving them. (Print
jobs can no longer be saved on the
hard disk.)
There is no more space on the
printer's hard disk.
There is less than 1 GB of free
space left for personal boxes on
the printer hard disk.
100 jobs are stored in the personal
box.
Direct sunlight or strong lighting
may be shining on the printer and
causing the sensor to malfunction.
The performance of a sensor
inside the printer may be impaired.
Corrective Action
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(→"Checking for Nozzle Clogging," User's Guide)
3.
Clean the Printhead if the nozzles are clogged.
(→
, If Printing is Faint)
4.
Execute Head Posi. Adj. again.
(→
, If Vertical Lines are Warped or Colors are
Misaligned)
Press the OK button to clear the error.
We recommend using a type of paper that you often
use, other than film, for Printhead adjustment.
(→
, If Vertical Lines are Warped or Colors are
Misaligned)
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User's Guide)
After printing, this message is cleared.
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User's Guide)
Press the Stop button and stop printing.
Delete print jobs from the queue.
(→"Managing the Job Queue (Deleting or Preempting
Other Jobs)," User's Guide)
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User's Guide)
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User's Guide)
Press the Stop button and stop printing.
Delete print jobs from the queue.
(→"Modifying Queued Jobs (Deleting or Preempting
Other Jobs)," User's Guide)
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User's Guide)
Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
Contact your Canon dealer for assistance.
41
Error Messages

Advertisement

Table of Contents
loading

Table of Contents