Replacing The Maintenance Cartridge; Error Messages - Canon imagePROGRAF iPF6300S Basic Guide No.2 Basic Manual

Error Messages

Respond to error messages as follows.
Error messages
Check the message and take the appropriate action.
• Before borderless printing, move the blue platen switch.
• Blue platen switch is dirty.
• Borderless printng not possible.
• Calibration There is a problem with the multi-sensor.
• Cannot adjust paper feed.
• Cannot adjust printhead.
• Cannot calibrate.
• Cannot cut paper.
• Cannot detect papr
• Cannot execute this command. Use other paper.
• Cannot feed paper.
• Cannot print as specifi ed.
• Check printed document.
• Close Ink Tank Cover
• End of paper feed.
• ERROR Exxx-xxxx (x represents a letter or number)
• Excessive temperature or humidity.
• Execute printhead cleaning.
• File read error.
• GARO Wxxxx (x represents a number)
• Hard disk error.
• Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
• Ink insuffi cient.
• Insuffi cient paper for job
• Mail box full. Delete unwanted data
• Mail box full. Now printing without saving data.
• Mail box nearly full.
• Maint. cart. The level is low
• Maintenance cartridge full.
• Maintenance cartridge problem.
• Manual printing is selected.
• Manual printing is selected, but a roll is loaded.
• Maximum jobs stored.
• MediaType Mismatch
• Move the blue platen switch No.xx to the right. (xx represents a number)
• Multi-sensor error
• No ink left.
• No ink tank loaded.
• No maintenance cartridge.
• No Maintenance Cartridge capacity.
• No Roll Unit.
• No x printhead (x is L, R, or not displayed)
• Not much ink is left.
• Paper loaded askew.
• Paper mismatch
• Paper not aligned with right guide.
32