Canon PIXMA MP800 User Manual page 76

Note
About "Image optimize"
When the "Default" (selections based on the machine setting) is selected, the machine operates
based on the tab 2 of the print setting specified in Memory card mode of the machine. For the
setting items, see
If you use a Canon PictBridge compatible device, you can select "VIVID", "NR", "VIVID+NR", or
"Face". (Note that these options cannot be selected for some models.)
Note
About "Date/File No. print"
You cannot change this setting on this machine.
Selections of this setting will be based on that of the PictBridge compliant device.
If you select an image which has had the shooting date embedded in it using a camera with the
print mode, select "Off" for this function. If you select "Date", "File No.", or "Both", the date and/or
file number will be printed over the embedded date.
Other Settings
If you use a Canon PictBridge-compliant device, you can use the following print settings.
(Note that these print settings cannot be used for some models.) For details, refer to your
device's instruction manual.
Shooting Info (Exif Data)
You can print shooting Info (Exif Data) on photos in list format, or in the margins of specified
photos.
Select Layout, then select the item displayed with the [i] icon.
35mm Film Style Layout (Contact Printing Layout)
You can print selected photos or index-specified photos in 35 mm film style layout (contact
printing layout).
Select Layout, then select the item displayed with the film icon.
74 Printing Photographs Directly from a Compliant Device
When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
1. Select the Auto Sheet Feeder as the paper source.
For details, see
Feeder" on page
Always load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select 10 x 15 cm / 4" x 6" for the "Page size", and "Photo" for the
"Media type".
3. Select N-up for layout, then select 16-up.
Some PictBridge compliant devices display the Layout option; 2-up, 4-
up, 9-up, and 16-up. In this case always select 16-up.
If there are no options on the PictBridge compliant device that
correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not
possible.
When you using Photo Stickers (PS-101), do not set "Borderless" in
"Layout" settings.
"Print Setting Items" on page
When "VIVID" is selected, green and blue portions of photos are
printed vividly.
When "NR" (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are
performed.
When "Face" is selected, backlit images are corrected when printed.
"Loading the Print Media in the Auto Sheet
24.
34.
Chapter 5