If The Ruled Lines Are Shifted; See "Aligning Print Head Automatically - Canon PIXMA MP500 User Manual

Photo all-in-one printer
Hide thumbs Also See for PIXMA MP500:
Table of Contents

Advertisement

Important
3
Check the status of the Print Head.
(1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
See
"Printing the Nozzle Check Pattern" on page
When one specific color only does not print, see
(2) If the problem remains, make sure that ink remains in the ink tank. Then turn off the
machine's power for at least 24 hours, and perform deep cleaning of the Print Head
again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center.
Aligning Print Head automatically
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head aligning does not work or if you wish, you can
adjust the Print Head manually. See
Note
1
Press [ON/OFF] to turn on the machine.
See
"Turning on the Machine" on page
2
Press the Open button to open the Paper Output Tray, and pull out the extension.
3
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See
"Performing Maintenance" on page
(2) Use [ ] or [ ] to select <Auto head align> and then press [OK].
The confirmation screen is displayed.
Note
Chapter 10
(3)
The process takes about 75 seconds to complete, so simply wait until the
Alarm Lamp stops flashing.
"Adjusting the Print Head Manually" on page
The Cassette does not feed paper for aligning the Print Head. Load
paper in the Auto Sheet Feeder.
Ensure that the Inner Cover is closed.
19.
Select <Head alignment print> to print the current adjustment values.
95.
"Replacing an Ink Tank" on page
94.
Routine Maintenance
88.
108.
99

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents